The shooting nail is generally composed of a nail with a toothed ring or a plastic positioning ring. Nailing is better, more economical, and more convenient than manual construction. Shooting nails are made of 60# steel with high strength and can be used for nailing concrete walls and steel plates, but cannot be used for nailing brick walls because of their high strength. Nails are used in conjunction with nail guns. If the nail gun is damaged, it can be nailed with a hammer, but it is difficult to hit and easy to bend. Generally, it is not recommended to use a hammer to nail the nails. Today we take a look at his nail strength.
A spike is a type of steel spike that is powered by the gunpowder gas produced by firing blank ammunition. Drive into concrete or steel plate to fasten and connect, usually used with a nail gun. The shape of the nail is composed of a nail with a toothed ring or a plastic positioning ring. The gear ring and plastic positioning ring are used to fix the nail body in the barrel of the nail gun to avoid side deflection when firing.
The nail is shaped like a cement nail, but it is fired from a nail gun. Relatively speaking, studs are better and more economical than manual construction, and easier to construct than other nails. Shooting nails are mostly used in the construction of wood projects (such as joinery and wood veneer projects, etc.), concrete walls, steel plates, and other substrates.
2. the nail force?
A nail is a high-strength steel nail. Generally, 60# steel is used as raw material and is made by heat treatment. The hardness of the finished core is HRC52-57. It can not only be nailed into concrete walls, but also penetrate Q235 0.8mm-1.2mm high-strength steel plates.
However, it should be noted that nails can be used for concrete walls or steel plates, but for brick walls, nails cannot be used, because the strength of nails is too high, and the wall made of bricks cannot withstand such a large impact force. will break the bricks.
3. Can the nails be nailed with a hammer?
Nail shooting is usually used with a nail gun. When using, just put the nail into the nail gun. Sometimes the nail gun will be stuck and other faults, and it needs to be shut down. So can the nails be knocked in with a hammer?
Generally speaking, shooting nails are not much different from ordinary steel nails, except that there is an additional gear ring or plastic positioning ring. When the nail gun is out of use, you can also temporarily tap it with a hammer. However, nails are designed for nail guns after all, and nailing them with a hammer can be difficult and skillful. Especially when concrete walls are very strong, it may not be possible to hammer them in. Therefore, it is recommended to repair or replace the nail gun.
